Tag: Netgear Genie Setup

In this post, you will find the exact steps that you need to setup Netgear EX2700. Let’s start:

Netgear ex2700 Setup Using WPS Method

• The first step, plug your Netgear ex2700 extender into a power supply outlet.
• Wait for the LED light on the side panel of the Netgear extender to glow.
• If you did not notice any LED light on your extender, then press the power button once to turn it on.
• Press and hold down the WPS button for 4 to 5 seconds until you see the LED blinking on Netgear extender.
• After 2 minutes, press the WPS button of your existing wifi router and wait until both the LEDs of the wifi router and the extender glow. This indicates that extender and wifi router is connected successfully with each other.
• After the completion of Netgear EX2700 setup process, you can choose the best place and move it there.

Netgear ex2700 Setup Using Netgear Genie

• Before you start Netgear EX2700 Setup make sure that the wifi router and extender are present in the same room.
• Make sure that a live internet connection is coming from the main router.
• Plug your Wi-Fi extender into the power outlet and wait until the power LED glows and becomes stable.
• Take your laptop or computer and open any web browser, which is going to take you to Netgear Genie to assist you with the installation process.
• In case, you don’t see Netgear Genie after opening web browser on your computer or laptop, then type www.mywifiext.net in the address bar of web browser and press enter.
• Enter username and password and click on login.
• Click ‘Continue’ to run the setup.
• Wait until Netgear Genie scans all the available Wi-Fi network.
• Select your network from the list and click ‘Continue’.
• Enter the password of your wireless network and click on Continue.
• Connect you laptop or computer with the extended network.
• Once you connect your devices to the new wireless network, click ‘Finish’ to complete the installation.

If you get any issue while setting up Netgear EX2700 extender, then feel free to contact our technical experts.

Are you thinking of setting up Netgear extender at your home or office? If yes, then you are at right place. Here, in this post you will get step by step instructions for Netgear extender setup. Before you start with Netgear Extender Setup there are some important things that you should keep in mind like:

• Make sure that your extender and router are in same room.
• The extender should get the power supply.
• Make sure you have a workable internet connection.
• Make sure you have more than two web browser installed on your pc or laptop. A situation may arise when you fail log in to Netgear Extender Setup website due to the web browser issue. In this case you can switch to other web browser.

So these are some important points that you should keep in mind before setting up Netgear extender. Now, let’s proceed further with the setup instructions.

Netgear Extender Setup: Manual Method

• Turn your Netgear Extender.
• Connect extender with your wifi device.
• Open the wifi manager and connect to Netgear_Ext network.
• Open any web browser in your laptop or computer.
• Type www.mywifiext.net in addressbar of your web browser and press enter.
• Create an account Netgear Genie Smart Setup Extender, if you don’t have already.
• Choose the network that you want to extend.
• Click on the next button.
• At last, click on the finish button.

Now you have successfully done the Netgear Extender setup, place your extender anywhere you like.

Netgear Extender Setup: WPS Method

• Power on your Netgear extender.
• Locate the WPS button on your extender.
• Press and hold the WPS button for 5 to 10 seconds.
• Push the WPS button given on the existing router.
• If the LED light will turns solid green, it means the router has configured with the extender properly.
• If you didn’t see any light on your device, then take help from our experts at My WiFi Ext Fix to fix this issue in minutes.
• Now connect your device to the extender network and use the same password as that of the network of your router.
• You can check out Netgear Extender manual for default login credentials.
• You extender is setup successfully. Now connect your wifi enabled devices with the extender network and enjoy seamless internet connection at your home or office.